Stillness in the Storm

An Agent for Consciousness Evolution

Status of QEG Build Morocco: Build Day 9 – Additional Capacitors Arrive: Comments from an Engineer

By 19 Comments

Spread the love
Photos by Julian Robles

We had one of the independent engineers that was here for the build leave a comment on Status of QEG Build Morocco: Build Day 3 – Initial Resonance Achieved! (Video), with some updates about the QEG. This commentary is relevant to the build and we thought we would share it. Thanks for commenting!

A quick update on this “from the ground”. I have been in Morocco building the QEG for the past 10 days, and arrived home yesterday.

I am an engineer and am independent of the QEG group. I went out to Morocco to be involved in the QEG build and to make independent 3rd party measurements. As suggested by Justin & Julian’s comments, this video represents only the first step in truly testing the claims of the QEG – it was the first time it was turned on, and was completely un-tuned. We measured this un-tuned set-up using voltage/current probes on an oscilloscope and showed about 1000W power from the wall, and 350W across the load (in this case 3 x 100W bulbs), so a COP (co-efficiency of performance) of about 35%. This was a few days ago, and in this set-up we would not expect a COP greater than than 100% even when tuned because the circuit is not complete.


Getting readings on the oscilloscope


As of yesterday, the final parts arrived to tune the system (capacitors), and it will take a few days to complete that process. In addition to the set-up shown in this video, the ‘exciter circuit’ has been added, which Witts says is the important aspect for creating the over-unity effect. The tuning will attempt to match the LC tank resonance to the mechanical resonance of the core (around 400Hz). Then the exciter circuit will create a regular 1.3MHz pulse to “condition” the core and apparently allow over-unity to take place.

‘exciter coil’

Should over-unity be measured, the final part of the plan is to extract some of the excess generated power on the output side and loop it back into the input (the variac & motor), meaning the mains cable can be unplugged. 

However, there is some work to do before this stage is reached. We have been spending a lot of time trying to understand the Witts work, and there are a few gaps in our knowledge that we are trying to figure out. I plan to go back out there in a few days to continue the assessment. The QEG team (Jamie, Val & Hope) are the most genuine, selfless and lovely people I have ever met. I would ask that you all have some patience with this. The right people are there to make this happen, just hold the space open to allow this to come about. 

– Mr. Jalapeno


The Capacitors have been in the QEG shop since build day 8, May 3rd, and the team has been at work since then preparing for the next round of testing. Stay tuned for more updates and as the Engineer suggested, hold the space of love and patience as we step forward into our collective future. 

– Justin and Julian

More Photos:

Notices and Disclaimers

We need $2000 per month to pay our costs. Help us one time or recurring. (DONATE HERE)

To sign up for RSS updates, paste this link (https://stillnessinthestorm.com/feed/) into the search field of your preferred RSS Reader or Service (such as Feedly or gReader).

Subscribe to Stillness in the Storm Newsletter

“It is the mark of an educated mind to be able to entertain a thought without accepting it.” – Aristotle

This website is supported by readers like you.

If you find our work of value, consider making a donation. 

Stillness in the Storm DISCLAIMER: All articles, videos, statements, claims, views and opinions that appear anywhere on this site, whether stated as theories or absolute facts, are always presented by Stillness in the Storm as unverified—and should be personally fact checked and discerned by you, the reader. Any opinions or statements herein presented are not necessarily promoted, endorsed, or agreed to by Stillness, those who work with Stillness, or those who read Stillness. Any belief or conclusion gleaned from content on this site is solely the responsibility of you the reader to substantiate, fact check, and no harm comes to you or those around you. And any actions taken by those who read material on this site is solely the responsibility of the acting party. You are encouraged to think carefully and do your own research. Nothing on this site is meant to be believed without question or personal appraisal.

Content Disclaimer: All content on this site marked with “source – [enter website name and url]” is not owned by Stillness in the Storm. All content on this site that is not originally written, created, or posted as original, is owned by the original content creators, who retain exclusive jurisdiction of all intellectual property rights. Any copyrighted material on this site was shared in good faith, under fair use or creative commons. Any request to remove copyrighted material will be honored, provided proof of ownership is rendered. Send takedown requests to [email protected].

What is our mission? Why do we post what we do?

Our mission here is to curate (share) articles and information that we feel is important for the evolution of consciousness. Most of that information is written or produced by other people and organizations, which means it does not represent our views or opinions as managing staff of Stillness in the Storm. Some of the content is written by one of our writers and is clearly marked accordingly. Just because we share a CNN story that speaks badly about the President doesn’t mean we’re promoting anti-POTUS views. We’re reporting on the fact as it was reported, and that this event is important for us to know so we can better contend with the challenges of gaining freedom and prosperity. Similarly, just because we share a pro/anti-[insert issue or topic] content, such as a pro-second amendment piece or an anti-military video doesn’t mean we endorse what is said. Again, information is shared on this site for the purpose of evolving consciousness. In our opinion, consciousness evolves through the process of accumulating knowledge of the truth and contemplating that knowledge to distill wisdom and improve life by discovering and incorporating holistic values. Thus, sharing information from many different sources, with many different perspectives is the best way to maximize evolution. What’s more, the mastery of mind and discernment doesn’t occur in a vacuum, it is much like the immune system, it needs regular exposure to new things to stay healthy and strong. If you have any questions as to our mission or methods please reach out to us at [email protected].

Reader Interactions

Comments

  1. newearthparadigm says

    Thank you Justin and Julian for continuing to ask the hard questions and take the clear photos that allow us to follow the progress of this historic journey. I posted your link on my site and have encouraged my readers to do the same. I want to express my appreciation to both of you. Blessings ♥

    Reply

  6. Anonymous says

    Following this new adventure from end of april and am very excited to see how it all evolves. Especially the 'foor the people' thought makes this journey worth while!
    This needs our attention and spiritual focus then it will happen …

    Reply

  9. LozDawney says

    I have noticed something. May mean nothing at all… or may mean something very important.
    In the Witts video's showing their QEG running including self-running and powering a load… There is NO EXCITER COIL anywhere in sight. In one of them, the guy with the camera looks up close all the way around the machine to show all the wires and parts, and NO EXCITER COIL!!!??!!!?
    Where did first mention of this exciter coil come from? And why is it so needed for all the replications if not for the original??

    Reply

    • Justin Deschamps says

      from my understanding, Jamie is using the exciter coil now to boost the power output. Right now Jamie has been spending a lot of time working on the QEG and we hope to have some good data to share soon.

      Reply

    • LozDawney says

      Ya but why is it needed? The original Witts QEG (in the video posted below) there is no exciter coil and yet he achieves OU… he has it self-running with a load and he does not need an exciter coil! May mean nothing… but seems a rather odd discrepancy is all. Perhaps I am just not privy to info that makes it make sense.

      Reply

    • Anonymous says

      One must alter the script ever so slightly when plagiarizing else be called a plagiarist.
      Its the end of the Morocco now. The TEAM will be off to another location (vacation) site. Why is this engineer taking a week plus to measure and reveal data.

      Reply

  12. Robert Tomkinson says

    Please listen. That us not an excitor coil. Tesla used his generator for a high voltage source to operate his spark gap that drove his "tesla coil" for the wireless transmission of cold "radiant energy" . It is not needed for producing over unity in this device. I already posted an explanation about the unbalanced tank cicuit. You need way way way more capacitance!

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.